The B2BFAB Camber Correcting Lift Kit is the only kit on the market for your Atlas that provides the 1.5" lift you want without sacrificing handling or proper alignment specifications!
The Overview:The owners of B2BFAB developed the first lift kit in 2016 for the MQB platform (MQB = shared chassis for Atlas, Tiguan, Alltrack, Taos, Golf, Jetta, Audi A3, Q3, and more). The initial kit was a simple bolt through front spacer design and resulted in less than ideal alignment specs, which made for less than ideal handling and tire wear. Both were issues that needed to be addressed. Over the next five years, we tested numerous prototypes and worked to perfect a design that checked all of the boxes. We are proud to introduce theB2BFAB Atlas Camber Correcting Lift Kit!
The Problem: For the Atlas and the majority of road-going vehicles, a small amount of negative camber is dialed into the front and rear suspension to offer proper handling. When an Atlas is lifted with a bolt through spacer lift kit or spring lift the negative camber of the front wheels is reduced or removed. With no camber adjustment present on the front suspension components, zero camber or even positive camber is unavoidable with bolt through lift spacers or spring lifts.
"Why do I care?" The proper amount of negative camber ensures optimal contact between the tire and the road through all handling maneuvers. When front camber is outside of the manufacturer's specified range in the positive direction, the handling is floaty, twitchy, and generally unstable at highway speeds. Unfortunately the Atlas does not have a way to adjust front camber.
The Solution: By offsetting the upper mounting point of the front struts, our lift kit removes the excessive positive camber allowing proper suspension geometry and specifications.
*ColorInstallinstructionsincluded.*
We STRONGLY RECOMMEND replacing ALL one time use hardware during the install to ensure proper torque specs and avoid hardware failure. Upgraded Complete OEM Hardware Kit is availableHERE.
To limit fender liner rubbing issues and ensure maximum clearance with upgraded tires use our BFT Block kit available HERE.
Adaptive headlight equipped models (only available 2021+) use our sensor mount relocation bracket available HERE.
For 2.0T Atlas models the front sits slightly higher in stock form and this is still noticeable when lifted. To avoid reverse rake we suggest our additional .5" rear lift spacer available HERE.
*Our lift kit is not recommended to combine with other lifting options.
Fits
Volkswagen Atlas 2018+ 2.0T Gen 3 4Motion Volkswagen Atlas 2018+ 2.0T Gen 3 FWD Volkswagen Atlas 2018+ 3.6L V6 4Motion Volkswagen Atlas 2018+ 3.6L V6 FWD Volkswagen Atlas Cross Sport 2020+ 2.0T Gen 3 4Motion Volkswagen Atlas Cross Sport 2020+ 2.0T Gen 3 FWD Volkswagen Atlas Cross Sport 2020+ 3.6L V6 4Motion Volkswagen Atlas Cross Sport 2020+ 3.6L V6 FWD
